Sonelastic® System for small samples

For the non-destructive elastic moduli and damping characterization of materials at room temperature using the Impulse Excitation Technique in accordance with the ASTM E1876, C1259 and E756 standards.

Sonelastic® Systems for small technical ceramics
Sonelastic® System for small samples with technical ceramics and biomaterials.

System general specifications:

  • Young's modulus range: from 0.5 to 900 GPa.
  • Frequency range: from 20 Hz to 96 kHz.
  • Vibration modes: Flexural, torsional and planar.
  • Dimensions range: from 20 mm (¾ inch) to 120 mm (4 ¾ inches). For clamped samples, the maximum length is 200 mm.
  • Geometries: Square or rectangular cross-sectioned bars, cylinders, discs and rings.
  • Square cross-section bars
    • Width and thickness (A): from 2 to 40 mm
    • Length (L): from 20 to 120 mm.
    • Aspect ratio: L/A ≥ 3.
  • 1
  • 2
  • 3
  • 4
  • 5

Items of this System:

  • 01 Sonelastic® Software license with free update for 5 years.
  • 01 Desktop computer Dell Inspiron or equivalent with Windows 10 Pro.
  • 01 SB-AP support for small samples.
  • 01 Jaw to clamp samples on to the SB-AP to meet ASTM-E756.
  • 01 Set of manual impulse devices (01 light and 01 extra light).
  • 01 IED, Automatic Electromagnetic Impulse Device.
  • 01 Light RT impulse device.
  • 01 CA-DP, directional acoustic sensor.
  • Installation and operation manuals in English.
  • Shipping and training.

Prices:

Basic System: USD 4,350.00.
Items of the Basic System:
  • 01 Sonelastic® Software license with free update for 5 years [Catalog page 12].
  • 01 SB-AP, support for small samples [Catalog, page 04].
  • 01 Set of manual impulse devices (01 light and 01 extra light) [Catalog, page 09].
  • 01 CA-DP, directional acoustic sensor [Catalog, page 10].
  • Installation and operation manuals in English.
  • Remote training and assistance.
System with all optional items: USD 8,300.00
Optional items:
  • 01 Desktop computer Dell Inspiron or equivalent with Windows 10 Pro.
  • 01 Jaw to clamp samples on to the SB-AP to meet ASTM-E756 [Catalog, page 04].
  • 01 IED, Automatic Electromagnetic Impulse Device with 01 Light RT impulse device [Catalog, page 08].
  • Shipping, installation and in loco training (travel expenses not included).

Commercial conditions:

SB-AP Support Manual

SB-AP Support Manual

The SB-AP support is suitable for the elastic modulus and damping characterization of small bars, cylinders, discs and rings using the Impulse Excitation Technique.

IED Manual

IED Manual

IED is a mechatronic device for automatic impulse excitation.

Sonelastic® Catalog

Sonelastic® Catalog

Sonelastic items technical catalog.

Software Manual

Software Manual

For elastic moduli and damping characterization of materials using the Impulse Excitation Technique.